1. Home
2. Forums
3. Design & Engineering

Discussion:
Hyster S50XM low coolant sensor

Can anyone tell me where to locate the low coolant sensor on a Hyster S50XM. The light stays on all of the time and the radiator is filled to capacity

• Posted 25 Nov 2008 08:39
• Discussion started by duodeluxe
• United States

duodeluxe

Post a ReplyReport this post

I know that some are on the bottom of the recovery tank, but some were located on the radiator toward the top and on the inside of the engine compartment, should be on the opposite end of where the fill cap is located, it's a small sensor with two wires running to it. Good Luck ! Also check that someone didnt remove the sensor and plug the hole.

• Posted 20 Dec 2008 07:43
• Reply by Alabama
• Illinois, United States

Post a Reply Report this post

wouldn't that be thing attached to the wires going into the coolant recovery tank?

• Posted 25 Nov 2008 11:31
• Reply by edward_t
• South Carolina, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.