1. Home
  2. Forums
  3. Maintenance & Troubleshooting
  4. No lift Past first stage

Discussion:
No lift Past first stage

Unit will not lift past first stage
Height switch 4
Dash display says calibrate ,tried to get to C4 to see Height cut out.
only goes too C3
This is not a tilt angle ?
  • Posted 14 Jun 2016 07:39
  • By pacfork
  • joined 2 Jun'07 - 55 messages
  • British Columbia, Canada
Post a ReplyReport this post
Showing items 1 - 1 of 1 results.
Maybe your tilt sensor need to be calibrated. Go to C.2.1 and calibrate it. If say calibration fail, retry until it is calibration accepted. Sometime, you must retry 5-6 time before it work.
  • Posted 22 Sep 2016 00:00
  • By mechanicmaster
  • joined 12 Jun'14 - 15 messages
  • Quebec, Canada
Post a ReplyReport this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Movers & Shakers
Rodney Grant Rodney Grant
Rodney Grant
Chief executive officer, Hire Industry Association New Zealand (HIANZ)
Nancy Pinto
Director of sales and operations planning, Hyster-Yale Materials Handling
Anthony Pishotti
President, Advanced Intralogistics
Andries Retief
Chief development officer, DHL