starts then dies - Technical Troubleshooting discussion in Forkliftaction's forums

Unicarriers (& Nissan) CPJ01A15PV:
starts then dies

i have a Nissan forklift model # CPJ01A15PV that will start run for about 5 seconds then die. i have rebuilt the vaporizer and lock off with new diaphragms. it seems like the truck is not getting enough fuel. i can run the truck no problem on starting fluid but when i switch back to propane my problems come back any advice would be appreciated thanks.

Posted 26 May 2016 03:06
Discussion started by jsanchez89
Illinois, United States

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

You have a fuel issue. You confirmed this by running longer than 5 seconds on alternative fuel.
You may have low vacuum to the lock off. Maybe it's low because of your dashpot leaking? I can't recall if they share the same supply. Regardless apply vacuum to the lock off manually and I bet it will run.

Posted 4 Jun 2016 04:36
Reply by stam
Ontario, Canada

Post a Reply Report this post

UPDATE i have narrowed it down to being in the distributor i found that the vacuum advance mechanism was not working (blown diaphragm). i have replaced the vacuum advance but i still cant get it to stay running. if i unbolt it from the distributor i can keep the forklift running but as soon as i bolt it down it cuts out. i have tried to advance the distributor but it doesn't seem to help at all. any idea on what else to try? please let me know

Posted 4 Jun 2016 02:39
Reply by jsanchez89
Illinois, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.