1. Home
2. Forums
3. Technical Troubleshooting
4. Raymond
5. EASI REACH

Raymond EASI REACH:
Code 81

Raymond easi reach,24V. Had code F5. replaced VFC card. Now has code 81.
I need to know what a code 81 means. Any help would be greatly appreciated

• Posted 31 Mar 2016 04:58
• Discussion started by fred_b
• Connecticut, United States

Post a ReplyReport this post

Thank You Stam Ontario. Checked connections from joy stick. Ran learn mode. Worked very well.

• Posted 12 Apr 2016 21:26
• Reply by fred_b
• Connecticut, United States

F K Berger

Post a Reply Report this post

Tried to run learn mode no soap. Will go over connections and try again.
Thank You for the tip

• Posted 31 Mar 2016 22:26
• Reply by fred_b
• Connecticut, United States

Post a Reply Report this post

lift pot out of range.
did the 81 appear right after the vfc swap? if so perform all learns and set up configuration settings probably all it wants.

• Posted 31 Mar 2016 09:33
• Reply by stam
• Ontario, Canada

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.