Showing items 1 - 3 of 3 results.
I had a fault similar but with no event code appeared. The truck had a rotating clamp fitted and if you rotated the clamp for more than a quarter turn, it would drop tilt function for 20seconds. I replaced PCA on the valve block and that cured the issue
pull pump contactors (P1 and P2) and check for broken armature pin.
i am not sure about the fc series but on the sc 4500 sometime the tilt interlock module will cause lift,tilt,and sideshift to sometimes work and sometimes not work.....
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.