Showing items 1 - 4 of 4 results.
I'll definitely look at those possibilities! Thank you so much!
FO-2 - EHPS Abnormality
Current flow in motor although TMPS is NOT on. Basically the unit is seeing current flow through the steer motor without the unit actually being on.
There is a fault somewhere in your steering system. There are numerous possibilities. Things to check:
Battery voltage
Key switch
Check the power steering wiring
The other checks require opening the PS Controller. Only a skilled technician should attempt it. 36/48 Volt forklifts are dangerous and severe shock can occur. Checking for voltage on wrong terminals can also fry your multi meter as well as the main forklift controller. Hope this helps...
can you tell me what the code fo-2 is onf a 7fbcu25?
Neither of the codes you have provided are legit. Please check code again and reply.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.