Showing items 1 - 3 of 3 results.
did you fix this already? you have a bad parking brake switch... parking brake switch open when intended to release the parking brake....you must check it or you can connect the two wires in parking brake switch......in trouble shooting do the basic first.. lol God Bless
I have checked the main contactor panel and fuses are ok.
Do you know how the main contactors are activated? Are they activated directly from the forward/reverse selector next to the wheel or through the circut boards?
Does anyone have a wiring diagram for this forklift? It is dificult to trace anything when you don't have one :)
you will want to find the control panel/contactor panel and check the main buss fuses to see if the drive fuse is blown.
This would be a large buss fuse located on a panel inside where the contactors are.
The last toyota unit i worked on like this the panel was located on the left side of the truck near the bottom behind a removable cover. Some of thier trucks have a swing down panel on the lower half.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.