no hydraulic functions - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
no hydraulic functions

on power up, truck displays message "hydraulics disabled". truck has travel. battery is fully charged. has no negative signal from ZAPPI controller to pump motor. forks are in raised position, but will not lower or raise. any help would be appreciated. s/n C896N01649L

Posted 2 Jul 2015 05:39
By forkdoc
joined 20 Sep'14 - 13 messages
New York, United States

Post a Reply Report this post

Showing items 1 - 3 of 3 results.

Sort messages by:

entered code as listed, hydraulics enabled and lift/lower now works fine. thanks again!

Posted 30 Jul 2015 04:59
By forkdoc
joined 20 Sep'14 - 13 messages
New York, United States

Post a Reply Report this post

awesome! thanks for the response. will do this first thing next week and post result.

Posted 18 Jul 2015 05:59
By forkdoc
joined 20 Sep'14 - 13 messages
New York, United States

Post a Reply Report this post

Press and hold the 3-4 buttons for 3 seconds. This will enable hydraulics. Press the 4 button first to get to the normal operating screen, then press and hold 3-4.

Posted 18 Jul 2015 04:03
Modified 18 Jul 2015 04:08 by poster
By BREWSKI
joined 10 Jan'12 - 1,699 messages
Nebraska, United States

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.