valeriy v;
If you are still in need of elec. circuitry contact me through e-mail in profile.
valeriy;
Contact me: rob1142atsbcglobaldotnet
Val;
point of contact rob1142 at sbc global dot net
My email [email address removed] I have a diagnostic program and the necessary equipment but the computer does not see the block They put the board on the other machine and it works. We want to repair this unit, but we do not have the electrical circuit of the block I would be very grateful if you help me.
thanks Valery
My email [email address removed]
I have a diagnostic program and the necessary equipment but the computer does not see the block They put the board on the other machine and it works. We want to repair this unit, but we do not have the electrical circuit of the block
I would be very grateful if you help me.
thanks Valery
valeriv;
We need an e-mail address added into your profile so we can work with you to address the issues you are having with the 80 volt, Sept 1993 production cut Linde. I'm assuming that you are not in possession of a Linde diagnostic handset or a personal computer with Linde's Truck Doctor software installed on it. This makes it difficult to talk to or hear friom your truck, but not impossible. The information you need is proprietory to Linde AG. We can however walk you through the various test to help isolate the cause or causes of you trudk's issues.
HI MEngr
I need the electrical circuitry for the electronics assembly traction Linda H30, serial number 336 E09006 130
Trouble is no movement forward and backward.
The contactor does not work.
hydraulics works
thank you
Valeriy
Valeriv v;
In order to be of any assistance to you we need a model, series, and serial number of the vehicle you are having issues with. There is something wrong with the catalog number. The first thing I'm looking at is that this book is for a 390 series truck which is not at presently in production and is it the Linde Drive Control electrical or the hydraulic circuitry you are needing help with.