1. Home
  2. Forums
  3. Maintenance & Troubleshooting
  4. Code 41 with jerking travel

Discussion:
Code 41 with jerking travel

Control handle would not calibrate so it got replaced. Unit is still jerking in travel but only gives code 41 when direction is fully selected. Jacked up unit to remove encoder belt and got code 32. Tried calibrating controll hanlde a few times but still jerking in travel and only codes when handle is pushed to full speed.

Model as a 31IR 40tt


Yea it a old unit but still works well.
  • Posted 13 Apr 2011 05:00
  • Modified 13 Apr 2011 05:24 by poster
  • By BenH
  • joined 17 Aug'09 - 27 messages
  • California, United States
Post a ReplyReport this post
Showing items 1 - 1 of 1 results.
OK after seeing this in print I answered my own question. What works when trying to go full power? Its the 1A contactor tips where welded shut. After 17 years of doing this something so simple kicks my *** but it happens to us all sometimes.
  • Posted 13 Apr 2011 05:28
  • By BenH
  • joined 17 Aug'09 - 27 messages
  • California, United States
Post a ReplyReport this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Fact of the week
According to studies published in the English Journal of Medicine, the impact of daylight savings is revealed by a 24% increase in heart attacks on the Monday following the spring shift forward. When clocks move back in autumn, heart attacks drop by about 21%, suggesting that loss of sleep is an important driver.