The module is equipped with two LEDs (one red, one yellow) which, in the event of a fault, will flash the
corresponding error code. The red LED flashes once to indicate that the system is about to signal first digit
of the error code, then the yellow LED will emit the number of flashes corresponding to this first digit. The
red LED now flashes twice to indicate that the system is about to signal second digit of the error code, then
the yellow LED will emit the number of flashes corresponding to this second digit.
The two LEDs have four operating modes which are used to signal different type of information.
To know the alarm you can also check the led blinking on the controller.
There is atble to identify the larm just looking the led.
Which kind of yale truck you are having porblem?
Regards
Hello Edward
No I didnt try TVh yet , I was expecting the name of electronics experts
Thanks for your reply