1. Home
  2. Forums
  3. Maintenance & Troubleshooting
  4. easi code30

Discussion:
easi code30

had jerky accl and would pull code 30 go into limited speed wouldnt relearn pot threw a new pot in relearned the jerky accl gone but still pulls code 30 after pulling in a1 in a look again way 30 not listed in my stuff truck is a older unit with a black box vehicle manager any info on code would be good or where on truck model or serial # are. THANKS
  • Posted 18 Dec 2009 13:39
  • By rollover
  • joined 25 Feb'09 - 15 messages
  • British Columbia, Canada
Post a ReplyReport this post
Showing items 1 - 2 of 2 results.
model and serial number are either stamped on frame around drive unit or in frame under top cover.
Had a weird one like this and found that a drive unit mount bolt had snapped allowing unit to still travel badly, and wobble a lot. Thats why they called us....
  • Posted 22 Dec 2009 10:53
  • By JonG
  • joined 7 Nov'07 - 155 messages
  • United States
Post a ReplyReport this post
If it's an early reach truck (easi G) try checking the encoder or the belt for loosness etc
  • Posted 22 Dec 2009 02:39
  • By martin_w
  • joined 27 Jul'05 - 13 messages
  • British Columbia, Canada
Post a ReplyReport this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

TOC Europe wraps up Rotterdam, Netherlands
Forklift Diaries
From the forum discussions …
"Congrats to the first person to use the new photos in the forums - Darek_S says: "I attached a couple photos of the valves I visually inspected (Toyota 7FBEU20). I followed the pressure line to the flow regulator valve...""
darek_s, United States
Read & Post in our Forums
Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".
From the forum discussions …
"Congrats to the first person to use the new photos in the forums - Darek_S says: "I attached a couple photos of the valves I visually inspected (Toyota 7FBEU20). I followed the pressure line to the flow regulator valve...""
darek_s, United States
Read & Post in our Forums
Forklift Diaries
Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".

PREMIUM business

Tailift Material Handling USA Inc
Part of Toyota Industries Group - Leading manufacturer of High-quality machines.
Tailift Material Handling USA Inc
Global Industry News
edition #1237 - 3 July 2025
While innovation and new technology are evolving at what seems to be an ever-increasing pace, the need to capture the data (telemetry) from this tech, and the ability to utilise it (telematics) for efficiency and cost savings, is one area attracting more and more attention ... Continue reading
Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".