The distributor input cable has two wires - one for the input voltage, and the second for the tachometer output. What is the form of the input voltage - is it a straight 12 VDC signal from the battery that is pulsed internal to the distributor as depicted on the electrical schematic, or is it a pulsed 12VDC input with the pulsing done by the ECU?
In looking at the ECS, there are several high power transistors (TPD 10085A) with one having a large diode (6NA?0040) on the power pin that could be used for the pulsing circuit.
Any information would be appreciated.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.