1. Home
  2. Forums
  3. Maintenance & Troubleshooting
  4. Freezer heaters not working

Discussion:
Freezer heaters not working

customer states that the truck quits working after about 30min in the freezer, and once it thaws it fine. I have B+ going to the F/C distribution board but nothing coming out to the heater resistors, the relay isn't closing when key is turned to the 'on' position, checked diode on F/C distribution board and found it open, anyone else had a similar issue? Not 100% sure this is gonna fix it but. ordered one.
  • Posted 2 Jul 2019 09:14
  • By Rgshock99
  • joined 11 Jun'14 - 8 messages
  • Texas, United States
Rgshock99
Post a ReplyReport this post
Showing items 1 - 3 of 3 results.
wires are are good, turns out it was the fan behind the mast was bad. replaced it and works good. thank you.
  • Posted 17 Jul 2019 21:52
  • Modified 17 Jul 2019 21:53 by poster
  • By Rgshock99
  • joined 11 Jun'14 - 8 messages
  • Texas, United States
Post a ReplyReport this post
Check thermistors are working, heaters will not come on until they are cold, disconnect wiring at them and short them together to turn on circuit path
  • Posted 12 Jul 2019 06:11
  • By dean_f
  • joined 10 May'19 - 6 messages
  • New Zealand
Post a ReplyReport this post
Did any of the heater wires get pinched in the multitask handle? Should have blown a fuse first
  • Posted 10 Jul 2019 07:34
  • By Ifixit
  • joined 30 Jan'17 - 174 messages
  • Pennsylvania, United States
Post a ReplyReport this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Toyota 8FG25
Toyota 8FG25
Braeside, Melbourne, Victoria, Australia
Hire
Crown CG33P5
Crown CG33P5
Braeside, Melbourne, Victoria, Australia
Hire
|
Forklift Diaries
Global Industry News
edition #1237 - 3 July 2025
While innovation and new technology are evolving at what seems to be an ever-increasing pace, the need to capture the data (telemetry) from this tech, and the ability to utilise it (telematics) for efficiency and cost savings, is one area attracting more and more attention ... Continue reading
Movers & Shakers
Jeannette Walker Jeannette Walker
Jeannette Walker
CEO, MHEDA
Stéphane Hénon
President, European Rental Association (ERA)
Tejal Ranjan
Chief marketing officer, JLT Mobile Computers
Pete Stanislawczyk
Chief executive officer, East Penn Manufacturing
From the forum discussions …
"Congrats to Afshin who was the second person to use the new photo system on the Forums. Click on the photos to see them enlarged. Afshin writes: "I have a error code 06-03 in Toyota 8FG30...""
Afshin, Iran, Islamic Republic Of
Read & Post in our Forums
Forklift Diaries
Upcoming in the editorial calendar
WIRELESS CHARGING
Aug 2025
MANAGING MIXED FLEETS
Oct 2025
Ask us about editorial contribution

Showcased in the Virtual Expo

Last Week's Most Read
edition #1236 - 26 June 2025
Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".