I have a doosan that only drives 1mph after driving it around for about 30 minutes.we recently replaced the left motor due to it being noisy but the problem was there before this.we figured that was causing the problem but it didn't go away.voltage is at 37.8 at standing
Showing items 1 - 5 of 5 results.
Lol.. Just noticed I'm 5 months too late trying to help you with this!!. Assuming you're up and running now!. What was the outcome out of curiosity?.
Regards,
Simon
Also worth checking handbrake transfer pivots. They're under the battery under covers so prone to corrosion and sticking causing brake binding.
Hi,
Is this a 24 or 48V machine?, and when you say voltage is 37 resting is that battery voltage you're measuring?. Does it have AC or DC drive motors?. The speed encoder is plug and play as just a pulse generator so no need to set up etc. Does steering in either direction make any difference? i.e does it feel as though one motor is fighting the other?
You need a dealer to program New encoder to controller.
update.we were told by doosan that a bad encoder on the motor might be the problem.we replaced the encoder but the problem is still there..any suggestions on what might be the problem to this big headache??
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.