1. Home
  2. Forums
  3. Maintenance & Troubleshooting
  4. monotrol no power

Discussion:
monotrol no power

I have a hyster s60xm serial D187V09651V
It will not move forward or reverse and no hydraulics to steer or lift. Im assuming a interlock somewhere wiring harness has been cut and spliced here and there. no signes of a seat switch cutout or wiring. Would this model have seat switch and would it cause no drive or hydraulics?
  • Posted 17 Feb 2021 11:48
  • Modified 18 Feb 2021 07:35 by poster
  • By Douglas_Wright
  • joined 12 Jan'21 - 7 messages
  • Florida, United States
Post a ReplyReport this post
Showing items 1 - 1 of 1 results.
This could be multiple problems. I would first check the park brake switches. One switch is to start the engine and the other one is for the transmission. If the switch doesnt see the parking brake released, it will not allow the trans to go into gear.
  • Posted 21 Feb 2021 06:50
  • By PorkChop
  • joined 28 Dec'20 - 12 messages
  • Ontario, Canada
Post a ReplyReport this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Crown SX3030TT4250
Crown SX3030TT4250
Braeside, Melbourne, Victoria, Australia
Hire
Hangcha CPYD30XH21F
Hangcha CPYD30XH21F
Flesherton, Ontario, Canada
New - Sale
|
Your Focus
Stuart Taylor
Reduce the risk by tackling the cause
Stuart Taylor
Read blog
Global Industry News
edition #1237 - 3 July 2025
While innovation and new technology are evolving at what seems to be an ever-increasing pace, the need to capture the data (telemetry) from this tech, and the ability to utilise it (telematics) for efficiency and cost savings, is one area attracting more and more attention ... Continue reading
Machinery-onQ
Machinery-onQ.com is the one place to source and sell all your new and used machinery.
Find equipment for sale | Add a listing
VISIT
machinery-onQ.com
Machinery-onQ
Global Industry News
edition #1237 - 3 July 2025
While innovation and new technology are evolving at what seems to be an ever-increasing pace, the need to capture the data (telemetry) from this tech, and the ability to utilise it (telematics) for efficiency and cost savings, is one area attracting more and more attention ... Continue reading

Showcased in the Virtual Expo

Machinery-onQ
Machinery-onQ.com is the one place to source and sell all your new and used machinery.
Find equipment for sale | Add a listing
VISIT
machinery-onQ.com
Machinery-onQ
JLG 600AJ
JLG 600AJ 2012
Flesherton, Ontario, Canada
Used - Sale
UN Forklift FBT20NQZ1
UN Forklift FBT20NQZ1
HANGZHOU, Zhejiang, China
New - Sale
|
Upcoming industry events …
Electric & Hybrid Vehicle Technology Expo 2025
October 6-9, 2025 - Detroit, MI, United States
The Battery Show North America
October 6-9, 2025 - Detroit, MI, United States
ASCL Awards 2025
November 14, 2025 - Melbourne, Australia
More Events
From the forum discussions …
"Congrats and thanks to a Gold Award Tech, DyslexicNerd_01 who writes: "There is no fuse for the lift motor on this (Crown MT20) model of lift. Most likely you burned out the lift/hydraulic motor...""
DyslexicNerd_01, United States
Read & Post in our Forums
Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".