The forklift jerks to a stop when you take foot off the pedal. Its a Techtronix 100 trasnmission and we have changed the auto deceleration and brake overlap settings but it seems to have no impact.
Showing items 1 - 5 of 5 results.
So we have done this as well as replaced tiss and toss and while its improved, but it still stops somewhat abruptly. now it kind-off drifts for awhile and then brakes. Any other next steps? I really appreciate your advice.
Thanks - I will do this and let you know. Your thought are appreciated.
So we have done this as well as replaced tiss and toss and while its improved, but it still stops somewhat abruptly. now it kind-off drifts for awhile and then brakes. Any other next steps? I really appreciate your advice.
what is the auto decal set to ??standard setting is 3 inchbrake overlap standard is 5 but a find 7 always a better feel
calibrate travel speed sensor correctly to 15m or 50ft and calibrate the transmission.after that replace the TOSS sensor
Not wet brakes - any other thoughts?
if truck has wet brakes first check the parkbrake lever on top of the axle isn't seized.its been known before
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.