Hello I am having an issue with this lift throwing event codes 219 and 338. I have done everything that can be done from checking wiring to replacing controllers as the troubleshooting has told me to do. It continues to produce these alarms and will not operate. Here's the kicker though it's an intermittent problem. Any information that could be provided would help immensely.
Showing items 1 - 5 of 5 results.
I have an issue in crown stacker display show error SH5500
Please guide me what should problem in this stacker
This is one of three crowns in the entire plant everything else is a yale but the other two are much older models.
If you can swap tiller sensor, can line, or controller with another truck, I would. You have another 5500 there?
Thank you for the reply. Is there anyway to test the access eight?
219 is CAN tiller error, if the CAN lines ohm out as per the specs then I would change Access 8 in the tiller arm.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.