Steering ram valve - Technical Troubleshooting discussion in Forkliftaction's forums

Clark CY50:
Steering ram valve

When we had motor out we removed steering ram and got it checked out.The ram needs new valve components as oil is bypassing some ware and we can't get anymore than 500 psi.hydraulic guy said ram should handle 1500 psi and the pump will do 1000 psi on the test bench.after inspecting ram it did not look that worn so we are stumped why we can only get 500psi.so maybe we are missing something or they don't need to ware much to start bypassing.any one with any suggestions or we're we can get parts as hydraulic guy is not sure we're to start looking.thanks Will

Posted 5 Sep 2013 20:32
Discussion started by will_o
Queensland, Australia

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

I would think that a rebuilt p/s cyl, complete with a new control valve would be available aftermarket, possibly thru TVH. The control valve section of the p/s cyl sounds like it's malfunctioning.

Posted 11 Sep 2013 01:06
Reply by bbforks
Pennsylvania, United States

bbforks (at) Hotmail (dot) com
Customers love technology- until they have to pay to fix it!

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.