Report this forum post

So we just put a new manifold into a 2012 model. Hooked everything up and now our problem is that we cannot get the forks to come down. Every other function works (tilt, forks in/out, slide left/right) the only way we can get the forks down is if we actuate another lever and then push the lever on the forks, or if we hit the gas pedal and rev up the RPM's then push the lever to bring the forks down. We checked the solenoid below the fuse panel. We have 12v there when you actuate the lever and you can hear it working but we have nothing.
  • Posted 30 Jan 2016 00:50
  • By bollinmi
  • joined 30 Jan'16 - 3 messages
  • Florida, United States

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
TOC Europe wraps up Rotterdam, Netherlands
Global Industry News
edition #1237 - 3 July 2025
While innovation and new technology are evolving at what seems to be an ever-increasing pace, the need to capture the data (telemetry) from this tech, and the ability to utilise it (telematics) for efficiency and cost savings, is one area attracting more and more attention ... Continue reading
Latest job alerts …
Columbia, SC, United States
Indianapolis, IN, United States
Saratoga, United States
East Syracuse, United States
Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".
Kalmar DCG16-900
Balling, Denmark
Used - Sale
Unicarriers FD80-2
Yokohama, Japan
Used - Sale
Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".