It is installed on a 7FGCU70 Toyota with a Cascade paper roll clamp. It has been installed over a year now. Having a driveability issue. When the lift is at WOT and running the hydraulics and working the inching pedal as if you are going into pick up a roll or stacking a roll you lose throttle. This last anywhere from 1 to 2 seconds. I know it is losing throttle because I have my laptop hooked up to the Impco fuel system and I am watching my FPPS values and they go an Idle value. I have reset Idle and WOT values several times. I have also reset all my kp ki & kd settings. this makes no difference. I have swapped out the Pace ECM with a spare. Also I have hooked the lift back up with the Pace system unplugged and the lift performs normally. The Pace one system is not setting a code for over voltage which would cause this. Anybody with any ideas would be greatlt appriciated.