Report this forum post

Pulling my hair out, 4 days on this machine and doesnt make sense, day 1 machine stalled and would not restart in a trailer, co-worker went out, replaced LPG coupler, wires plugs etc, regulator (he's about replacing parts, not trouble shooting) customer called me said he couldnt get it going, I come out, determine fire, and regulator, 1.5 psi, took apart mixer, cleaned reassembled, reset power valve, and fuel/air. no start, but was kicking, pumped accelerator a couple times, started and stalled when throttle was opened. Day 2 came back, checked and rechecked, fuel delivery, same thing, no start, but once in while would start but died when throttle opened, said I have to have a LPG problem, so got some gas (dual fuel) cleaned everything out primed it and it started, ran good for 2 minutes then died out, would not restart, checked distributer, I adfvance it all the way to the back of the machine, started right up, but had a small bind, as if the timing was off, but ran perfect, took distributor out and checked to see if it was off a tooth, wasnt, reinstalled advance all the way started up, ran perfect for about 30 mins, then died would not restart. day 3 took covers off timing gear, wound engine, checked TDC cam at 3 oclock, alighned with small mark crank notch alinged with notch in housing, oil pump gear off to 2 ocloc, looking with the frint of the engine, so timing is on, rechecked air gad on p/u,.35mm OK, still have fire. Day 4 machine started right up on LPG, ran great for 10 mins, then was sputtering but revved up, switch it to gas, ran good, same thing, sputtering but revving, dist still advanced, switch back to LPG, ran great for a wile, then dies, hard to restart but does restart. Ballest rester at I thin 6 or 60 ohms, had a short in the little switch in the carburator or solenoid, checked and rechecked vaccums, intake leaks, everything, it seems like a lean condition, but does not make sense to me what so ever!! non EFI, this should be simple, compression at 150 across the board, and when does start, runs great, unhappy customer and I'm at the end of my rope, Any bo\dy seen something like this, or any advise on what else to check could save my life!!!
  • Posted 22 Jun 2010 10:51
  • By Barfly_olaf
  • joined 10 Oct'09 - 81 messages
  • Nova Scotia, Canada
SEMPER FIDELIS

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Hangcha CBD15
China
Used - Sale
USD1,600
Terberg TT223
Balling, Denmark
Used - Sale
Global Industry News
edition #1237 - 3 July 2025
While innovation and new technology are evolving at what seems to be an ever-increasing pace, the need to capture the data (telemetry) from this tech, and the ability to utilise it (telematics) for efficiency and cost savings, is one area attracting more and more attention ... Continue reading
Upcoming in the editorial calendar
WIRELESS CHARGING
Aug 2025
MANAGING MIXED FLEETS
Oct 2025
Upcoming industry events …
October 6-9, 2025 - Detroit, MI, United States
October 6-9, 2025 - Detroit, MI, United States
November 14, 2025 - Melbourne, Australia
Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".

PREMIUM business

GemOne
Telematics for industrial fleets. Fleet & safety management solutions: track vehicles, boost efficiency, operate safer, & avoid unexpected downtime.
Movers & Shakers
Jeannette Walker Jeannette Walker
CEO, MHEDA
President, European Rental Association (ERA)
Chief marketing officer, JLT Mobile Computers
Chief executive officer, East Penn Manufacturing