I have a mitsu FGC 15 with a imco lp system that is runing rich. It starts fine acel slowy fine, but under hard acel conditions it sputers then goes. Has no power under load. I have the program for the system. It shows unit runing rich. Replaced LP mixer govnor and sensors from working unit.installed new regulator. i did ign tuneup , replaced O2 sensor ,coil, and crank pic up.found problem with thermostat and clogged lins on FTP and PTV. repaired those issues and i still have the same problem. If any body can help me it will be greatly apprecated.
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.