1. Home
  2. Forums
  3. Report post

Report this forum post

Hi everyone , does anyone has ECM harness diagram ? I'm working on this komatsu with Nissan k21 LPG. there is no power at the ECM. It cranks but no start. just like to see where the ECM power comes from. I checked all the fuses and relays, but I'M lost, need the diagram to find out where the ECM power comes from.
  • Posted 21 Jun 2025 23:16
  • By Kainthrai_Jesse
  • joined 21 Jun'25 - 1 message
  • Ontario, Canada

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Fact of the week
In March 2002, identical twins in Finland died on the same day in similar accidents within hours of each other. A 70-year-old man was killed by a truck while cycling; hours later, his twin brother was killed by a truck on the same road, about a mile away, before the family had been informed of the first accident.
Upcoming industry events …
LogiSYM Platinum Indonesia 2025
November 27, 2025 - Jakarta, Indonesia
Caspian Ports and Logistics 2025
December 9-11, 2025 - Aktau, Kazakhstan
Automate 2026
June 22-25, 2026 - Chicago, Illinois, United States
More Events
Movers & Shakers
Esie Cortez Esie Cortez
Esie Cortez
Vice president - IT & EP OEM parts, Big Joe Forklifts
Aurelie Clerquin
Vice president of finance, Exotec
Jussi Rautiainen
President - business area industrial equipment, Konecranes
Deborah Baker
Board chair, Equipment Leasing & Finance Association
Terberg YT220
Terberg YT220 2004
Balling, Denmark
Used - Sale
Terberg YT223
Terberg YT223 2023
Balling, Denmark
Used - Sale
|
Upcoming industry events …
LogiSYM Platinum Indonesia 2025
November 27, 2025 - Jakarta, Indonesia
Caspian Ports and Logistics 2025
December 9-11, 2025 - Aktau, Kazakhstan
Automate 2026
June 22-25, 2026 - Chicago, Illinois, United States
More Events
From the forum discussions …
"ForklifttSteve from Mississippi seeks advice on resealing a leaking valve cover on a Mitsubishi 4G64. Ron K from North Dakota suggests 'Use the loctite flange sealant. It has been the best so far I've used in 30 years.'"
ForklifttSteve, United States
Read & Post in our Forums
Movers & Shakers
Esie Cortez Esie Cortez
Esie Cortez
Vice president - IT & EP OEM parts, Big Joe Forklifts
Aurelie Clerquin
Vice president of finance, Exotec
Jussi Rautiainen
President - business area industrial equipment, Konecranes
Deborah Baker
Board chair, Equipment Leasing & Finance Association