Report this forum post

Chandler,

This code shows as Transmission temp OORL. Since trans was rebuilt, check wire harness for temp sensor, wire 367 should be around 5 volts. Check using white wire at sensor. If no voltage move ground to battery negative. Still no voltage, check transmission controller. If you have voltage, suspect sensor. Make sure harness has not been damaged. Good Luck
  • Posted 24 Mar 2025 22:37
  • By Fishmech
  • joined 12 Jul'17 - 370 messages
  • Virginia, United States
The hard to do we do right away. The impossible just takes a little longer.

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Upcoming industry events …
October 29-31, 2025 - Marina Bay Sands, Singapore
November 13-14, 2025 - Berlin, Germany
March 10-12, 2026 - Hong Kong, Hong Kong
Latest job alerts …
Marietta, United States
Tampa, United States
Dallas, TX or Lexington, KY, United States
Tampa/Orlando Florida, United States
Movers & Shakers
Steve Dimitrovski Steve Dimitrovski
Director sales for Australia and New Zealand, Swisslog
General Manager, Forkpro Australia
Global CEO, Swisslog
Board member, UKMHA