1. Home
  2. Forums
  3. Report post

Report this forum post

control valve is not working on "mast down ". All functions are working as suppose to.Mast UP is good ,but down is not being able to lower it.Initially spool was damaged and bypassing (still working), after re-chroming and resizing spool
customer reinstall valve and now doesn't work. Electrical signal is going to coils and coils are ok. Is there pressure sensor some were ? I can't get my hands on hyd. schematic. Any help will be much appriciated.
Thanks
Lubo
  • Posted 12 Mar 2024 01:47
  • By Lubo_Blazek
  • joined 12 Mar'24 - 2 messages
  • British Columbia, Canada

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Fact of the week
Brussels Airport in Belgium, Europe is the world's largest sales point for chocolate, with over 800 tonnes of chocolate sold annually. This averages out to about 1.5 kilograms sold every minute.

Showcased in the Virtual Expo

Fact of the week
Brussels Airport in Belgium, Europe is the world's largest sales point for chocolate, with over 800 tonnes of chocolate sold annually. This averages out to about 1.5 kilograms sold every minute.