Code 475 (LS transducer out of range high). Tried recalibrating and wound up replacing the transducer but code came back. Replaced Access4 along with updated software and recalibration and after a couple of days 475 is back again. Analyzer 2.4.25 shows 16-17mA with a range of 4-20 mA with a load on the forks. Voltage at the transducer shows 9.6V and at CA 412-25 and 26 9.5V is shown on a DVOM. Crown guide calls for Access4 replacement again. Am I missing something?
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.