Report this forum post

I have a Clark CGC20 with the 4g64 Mitsubishi, and having a hard time with it. Fires right up, idles great, revs up in neutral nicely. When you put it in drive it falls on its face with acceleration. Has no power and bogs down/stalls out. I've put new wires, plugs, caps, rotor. I've pulled the timing cover and check the timing belt for a jumped tooth. It didn't.. Checked ignition timing several times. Rebuilt the LPG mixer and carburetor. Replaced the fuel lockout filter. All 4 cylinder have good even compression. Messed around with the governor nothing helped. Completely disconnected it now. I've converted it over to a 1 wire GM alternator but it ran good for awhile after that, so I dont think that has anything to do with it. Any help would be appreciated.
  • Posted 15 Mar 2022 10:39
  • By BadIdeaSupplyCo
  • joined 19 Feb'21 - 2 messages
  • Kansas, United States

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Upcoming industry events …
October 6-9, 2025 - Detroit, MI, United States
October 6-9, 2025 - Detroit, MI, United States
November 14, 2025 - Melbourne, Australia
Global Industry News
edition #1237 - 3 July 2025
While innovation and new technology are evolving at what seems to be an ever-increasing pace, the need to capture the data (telemetry) from this tech, and the ability to utilise it (telematics) for efficiency and cost savings, is one area attracting more and more attention ... Continue reading
Movers & Shakers
Jeannette Walker Jeannette Walker
CEO, MHEDA
President, European Rental Association (ERA)
Chief marketing officer, JLT Mobile Computers
Chief executive officer, East Penn Manufacturing