Hello everyone.

I have a problem with LINDE E16P-02, H2X386F..., 2015
The operator incorrectly connected the battery plug when replacing the battery (it was broken without a pin).
After correct connection - no reaction.
Replacing the fuse F2 (Fuse before emergency off switch 15 A) started the truck.
Only a twist works. The trolley does not move, it seems to be held by a brake, because you feel that it wants to go. The hydraulics don't work, you hear the pump running. Lighting and heating do not work.

After starting, the errors are shown on the display immediately.
Error L306_L272, L299

I quickly determined that 2 48V / 12.5V 150W transformers are damaged.

Can damage to these transformers cause hydraulic errors?
Communication with all drivers is via canbox. Only the hydraulics report errors.