Yes, that is were I am getting the specifications from. According to the manual on terminal 50 (TPS1) of ECU it should have 0.6 volts, terminal 69 (TPS 2) should have 4.5 volts. However I have been told by more than one that those parameters are misprinted (swapped around) in the TCM and Nissan manual.
I am getting 4.5v on term 50 (TPS1) and 0.6v on 69 (TPS2)
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.