a long 3/16" pin punch and put about a 20deg bend about 1-1/2" up from the tip. other option is Part# 110567 (crown tool) about $46. They work but are junk. Only last about 1/2 dozen load wheel changes and they either bend or fall apart. Option 3 is a BFH an a BF-punch. Drive the axle out breaking off the roll pin and replacing the axle with the roll pin.
Option 4 join the forklift mechanic FB groups and ask about crown load wheels. You will get about 300 replies within 30 min with Crown load wheel jokes!
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.