Beneath the brakepedal (take away the cover with the gaspeddle) you see a small hydr.pipe
going in the part that is fitted against the left side of the drive motor.
If you look at the left side of that part there is a plug, (wrench 19/22)take this away and put in a boult same size as from the load backrest. Turn it in some 1cm/1.5cm.
There are 3 springplates inside that you will have to squeesh together to release the brakes.
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.