If there's power going into the coil and there's a new wire from coil to distributor then you may have a bad coil or the new coil wire you are using is no good. Try replacing them both.
hi jimmy can u tell me where i can find the ignition coil??
Problem was simple. The conector inside of the plug that plugs into the coil was a loose fit. After removing the supply voltage wire from the plug i crimped it closed some and truck cranked up.
I have checked voltage to the coil, to the O2 sensor, and checked grounds to the coil, oil pressure sending unit, O2 sensor, and the ECU. The fuel selector switch is good. Everything leads back to the ECU not sending to the coil to fire. If i am missing something let me know.. Thanks
I have changed with a new one. Still no fire coming out of new coil. The tech before me replaced plugs and wires. Thanks for the reply.
Hello Jimmy,
If you have voltage to the coil and nothing going to the distributor, I would suspect the coil.
Try a new coil. You might be getting way ahead of yourself with the ECU and laptop diagnostic.
Check the simple things first.