forklift idles rough and shuts off. No codes and only at idle. - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
forklift idles rough and shuts off. No codes and only at idle.

I need help. Forklift idles rough most of the time. It rarely idles normal anymore. It doesn't give any codes and this only happens at idle. Once you give it gas, it runs, but when back at idle, it dies again. What could it possibly be?? I checked the vacuum hoses and they're all connected.
help please....
thank you

Posted 26 Jun 2009 15:18
By noe_g
joined 26 Jun'09 - 1 message
California, United States

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

try pulling the air filter out and see if that makes any difference
also there is a drain plug on the converter that can be removed and the converter can be cleaned out

other than that anything else that would be wrong causing this problem would trigger a code of some sort, usually

Posted 28 Oct 2016 23:43
By swoop223
joined 23 Mar'12 - 3,691 messages
North Carolina, United States

You've been swooped!
swoop223@gmail.com

Post a Reply Report this post

having the same issue do u remember what it was

Posted 28 Oct 2016 06:23
By jsanchez89
joined 26 May'16 - 29 messages
Illinois, United States

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.