codes p 03 and p 07 - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
codes p 03 and p 07

hi guys , i have a problem with my CAT the engine started but no traction i hope that somebody can help me please

Posted 6 Jan 2015 13:02
By 80luis
joined 6 Jan'15 - 2 messages
nuevo leon, -

Showing items 1 - 2 of 2 results.

Sort messages by:

thanks swoop223 I've check te harness and conector and this is ok but i don't checked the EGI relays i'll try tomorow thanks so much....my best wishes from monterrey

Posted 7 Jan 2015 09:46
By 80luis
joined 6 Jan'15 - 2 messages
nuevo leon, -

Post a Reply Report this post

P03 - VCM communication error
P07 - MP communication error

first i would check the relays in the relay box and make sure they are ok. I've found that bad relays (EGI relays) can cause communication errors.
Also check the harness between the ecm and the meter panel, the com error is between the ecm and the meter panel, make sure the connectors are plugged in and locked in.

Posted 6 Jan 2015 22:37
By swoop223
joined 23 Mar'12 - 3,691 messages
North Carolina, United States

You've been swooped!
swoop223@gmail.com

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.