code 4 and PPP on Display - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
code 4 and PPP on Display

SN: C814N02800G
We have been having a problem with code 4, replaced switch and problem went away.
truck runs great for long periods of time then code 4 again, parking brake switch is good, 100% contact at switch and switch connections, but still having code4, went out today to check wiring and troubleshoot the code 4 and now have a PPP on display.
I have schematic's and wiring Diagrams.
What does PPP mean on display?
is there a way to read stored codes, inputs and outputs with display?
Grateful for any input
Thanks, James

Posted 9 Apr 2020 07:06
By Parkway2
joined 29 Jul'15 - 47 messages
Texas, United States

pkwyls@yahoo.com

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

Well the PPP on display went away, thinking that was due to very high humidity.
still have the code 4,
the schematic I have is for 42 pin connector at controller.
The truck has Danaher controller with 32 pin connector.
pull some more hair out and keep looking forward.

Went back today and everything working as normal.
one bare wire and corrosion somewhere..

Posted 14 Apr 2020 01:45
Modified 15 Apr 2020 07:02 by poster
By Parkway2
joined 29 Jul'15 - 47 messages
Texas, United States

pkwyls@yahoo.com

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.