1. Home
2. Forums
3. Technical Troubleshooting
4. Jungheinrich
5. EJD220

Jungheinrich EJD220:
90531766

Hi all
I have a fault 1953
On checking I get the following output X6.1 no load connected or over temperature.
Any ideas.

Thanks in advance

• Posted 30 May 2024 03:43
• Discussion started by Paddyteclinde
• Ireland

Post a ReplyReport this post

Thanks Tanel for getting back to me.
We got it sorted ,it was a broken wire in the tiller loom

• Posted 11 Jun 2024 02:11
• Reply by Paddyteclinde
• Ireland

Post a Reply Report this post

Check tiller head switch, platform switch, saftey switch of the guard rails.

Also what is conmected to the x6.1?

• Posted 11 Jun 2024 02:08
• Modified 11 Jun 2024 02:09 by poster
• Reply by Tanel_M
• Estonia

Post a Reply Report this post

Thanks for your help Fittermax.EJD 220 90502223 I now have a second truck down with same fault 1953. The truck will drive and lift at a very slow speed if you keep the crawl switch pressed.Otherwise the fault shows and nothing works.
Thanks

• Posted 4 Jun 2024 20:41
• Reply by Paddyteclinde
• Ireland

Post a Reply Report this post

Hi.
No. tillerhead is plug and play. Are you sure it's an EJD??? If I check serial in JETI it's not...

• Posted 31 May 2024 06:09
• Reply by Fittermax
• Denmark

Thank's for helping. Contact d-b-a@mail.com
P i s s Work, gone fishing

Post a Reply Report this post

Hi Fittermax, thanks for getting back to me model EJD 220 90531760.
We have fitted a new tiller still the same , we swapped a tiller head from a truck that was working and still the same fault.Do we need to calibrate the tiller head when we fitted it.

Thanks again,

• Posted 31 May 2024 01:12
• Reply by Paddyteclinde
• Ireland

Post a Reply Report this post

Hi.
Serial nr. is for a EJC-112z and not EJD. Check your tillerhead...
Regards.

• Posted 30 May 2024 20:42
• Reply by Fittermax
• Denmark

Thank's for helping. Contact d-b-a@mail.com
P i s s Work, gone fishing

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.