Trying to remove drive motor - Technical Troubleshooting discussion in Forkliftaction's forums

Linde (& Baker) H30D:
Trying to remove drive motor

serial number H2X393T07111
trying to get the LH side drive motor out to rebuild. removed the 16 bolts and all hyd hoses and fittings but motor will not come loose. is there something else that holds this motor in the housing?
Thanks

Posted 13 Jun 2014 05:34
Discussion started by joep56
Texas, United States

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

rmo mast to start with!

Posted 31 Oct 2014 09:57
Reply by forkup
Massachusetts, United States

Post a Reply Report this post

There are two holes within that 16 bolt perimeter that you can thread two of the mounting bolts in and push the motor out. Make sure the holes are cleaned out and that you turn them in evenly.

If I recall the holes are at about 3 o'clock and at 9 o'clock.

Posted 27 Jun 2014 12:27
Modified 3 Jul 2014 03:30 by poster
Reply by IFD45
Wisconsin, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.