1. Home
  2. Forums
  3. Maintenance & Troubleshooting
  4. event code -65

Discussion:
event code -65

we been having problems with this code, i can not find any documentation to tell me what is it or why? does anyone has or had this problem with this code before? and how did you fixed it /
  • Posted 24 Aug 2020 06:19
  • By americo_zea
  • joined 24 Aug'20 - 1 message
  • North Carolina, United States
Azea
Post a ReplyReport this post
Showing items 1 - 2 of 2 results.
Hello I have an intermittent problem on sc4000 code 65 / 68 coil test ok 35 ohm with wire off.. what controller drive the coil on those machine ? I don't have the book thanks
  • Posted 3 Dec 2022 07:38
  • By vincent_l
  • joined 27 Jul'14 - 10 messages
  • Quebec, Canada
Post a ReplyReport this post
Code 65 is 'Line or Steer contactor coils are shorted', Steer 145-155 ohms, Line 55-65ohms (G248) or 30-37 ohms (G148) depending on contactor type (G248 or G142 stamped on coil). Or short in coil wiring. Or faulty master controller as final possibility.
  • Posted 27 Aug 2020 19:45
  • By techno_nz
  • joined 9 Aug'13 - 138 messages
  • Canterbury, New Zealand
Post a ReplyReport this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Fact of the week
At the opening ceremony of the Sydney Harbour Bridge in 1932, marching bands were instructed to walk out of step as they crossed the bridge. This unusual directive was given as a precaution due to concerns about the bridge's structural integrity during its early use.

PREMIUM business

Zhejiang UN Forklift Co., Ltd
Manufacturer of IC forklifts, electric forklifts and warehouse equipment.
Zhejiang UN Forklift Co., Ltd
Upcoming in the editorial calendar
MANAGING MIXED FLEETS
Oct 2025
ASSET FINANCE
Nov 2025
Ask us about editorial contribution