1. Home
  2. Forums
  3. Report post

Report this forum post

I have check the voltage thur out the machine. All is 24v right up into the harness running up the handle. But non of the controls when activated in the handle produce any voltage back down the harness out of the handle to the solenoid or horn.
  • Posted 17 Oct 2014 22:59
  • By pheasanthunter
  • joined 15 Oct'14 - 2 messages
  • New Jersey, United States

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Machinery-onQ
Machinery-onQ.com is the one place to source and sell all your new and used machinery.
Find equipment for sale | Add a listing
VISIT
machinery-onQ.com
Machinery-onQ

Showcased in the Virtual Expo

Movers & Shakers
Andries Retief Andries Retief
Andries Retief
Chief development officer, DHL
Michael Simms
Director, ICHCA Australia
Dominiek Valcke
CEO, TVH
Chad Davis
Sales and operations director, Logitrans A/S

PREMIUM business

Flexi® By Narrow Aisle Limited
Leading manufacturers of very narrow aisle (VNA) equipment.
Flexi® By Narrow Aisle Limited
From the forum discussions …
"D203 and D206 codes for a Linde H35D - Thankyou Gold Award Tech John_Bradley: Remove plug from display clean and put dielectric grease on it and reinstall. Look for..."
John_Bradley, United States
Read & Post in our Forums
Fact of the week
At the opening ceremony of the Sydney Harbour Bridge in 1932, marching bands were instructed to walk out of step as they crossed the bridge. This unusual directive was given as a precaution due to concerns about the bridge's structural integrity during its early use.