News service and business centre for materials handlingHOME
DISCUSSION FORUMS : Forkliftaction.communicate
Atlet reach truck UHS , year 2005
  • dang_n
  • Ho Chi Minh city, Vietnam
Original post deleted...
Forkliftaction does not condone the selling or trading of propriety information including authorization codes or any other dealing of copyrighted material by unauthorised persons. Any correspondence about illegal activities on our forums could put you in breach. Forkliftaction would be obligated to pass your contact details to police authorities if they were requested.

Please do not post these types of material on our forums again.
  • Posted 7 Jun 2012 02:10 PM
Total replies: 10. Showing items 1 - 10 of 10 results.
E97 was the high temp C or M visable?
Drive Motor Overheated
Check cooling Fan and make sure there nothing restricting the air flow through the regulators heat sink use air to blow off dust, make sure the fan operate for about 20 second after logging on.

A good engineer is a helpful engineer
  • Posted 8 Jun 2012 03:59 AM
  • dang_n
  • Ho Chi Minh city, Vietnam
Hi powerlifter,

Thanks for your comment, another point I would like to adding: before indicate E97 , it appear E71 first.
  • Posted 8 Jun 2012 01:35 PM
Hi dang n
E71 is low output
Basically the current in any of the low outputs is higher than it is rated for, Normally this would relate to a short circuit..
Find the fault causing the increase in current (short circuit) to rectify the problem

My guess would be if there is a E97 temp problem caused by the cooling fan been inoperative then maybe the fan or feed wire is shorted which would cause both faults.
All thi bearing in mind the Drive or Pump motor Fuse hasnt blown...

Hope this helps

A good engineer is a helpful engineer
  • Posted 8 Jun 2012 09:26 PM
  • • Modified 8 Jun 2012 09:37 PM by poster
E71 is posible resistor in cable to beacom light.

Email soyjoram@gmaildotcom
  • Posted 9 Jun 2012 02:38 AM
  • dang_n
  • Ho Chi Minh city, Vietnam
Have checked both cooling fan and temperature sensor of drive motor( 700 Ohm at 40 degree C) are OK!

pls notes at every early morning after switching ON/OFF approx. 20 times, some times the truck can run without E97 or E96.

  • Posted 14 Jun 2012 07:50 PM
Is the battery ok
  • Posted 15 Jun 2012 03:35 AM
check low short in motor.
  • Posted 15 Jun 2012 04:15 AM
hey what does E105 mean
  • Posted 26 Dec 2014 11:00 PM
Is possible traction encoder.
  • Posted 30 Dec 2014 06:05 AM
error 105 you have bad dive control you can exchange the drive control for the pump control to see if there is the control both are the same
  • Posted 1 Mar 2015 02:21 AM
  • • Modified 1 Mar 2015 02:23 AM by poster
Total replies: 10. Showing items 1 - 10 of 10 results.

Having trouble using the Discussion Forums? Contact us for help! accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.


Forkliftaction Media Pty Ltd
PO Box 1439
Milton QLD 4064
About Forkliftaction
The Forkliftaction Team
Privacy Policy
Site Map
Business Directory
Discussion Forums
Industry News
Events Calendar
Jobs & Resumes
Photo Galleries
Blog articles
Our Bloggers

Industry Brands
Company Index
Regions & Countries

Advertise on Forkliftaction
Editorial Features / Calendar
Featured Businesses
Past News Editions
Industry Associations
Storing your login information automatically.

When you select the 'Remember me' option, your login information will be stored on your computer in the form of a cookie. When you visit again, the stored login information will be retrieved automatically and you will not have to submit your login parameters (email address and password) each time you want to visit our members-only pages.

A cookie is a small piece of data that is sent to your browser from a web server and stored on your computer's hard drive. A cookie can't read data off your hard disk or read cookie files created by other sites. Cookies do not damage your system.