Ads
News service and business centre for materials handlingHOME
DISCUSSION FORUMS : Forkliftaction.communicate
toyota forklift 7FBCU55
Once I release the hand break it goes into an alarm. I by passed the limit switch and it still not want to move. it keeps alarming.
  • Posted 29 Nov 2018 06:36 AM
Total replies: 9. Showing items 1 - 9 of 9 results.
Replies
  • CR500R
  • Indiana, United States
Check the seat switch wiring. Is it showing any fault codes? If the operator is on the seat and the brake is released you shouldn't get a fault, but if it isn't seeing the seat switch made up it will give an A7 fault.
  • Posted 30 Nov 2018 03:57 AM
I will check the seat wiring. I don't see any fault codes because the forklift uses a hytroller controller. I need a different troubleshooting guide other than the one I have here. Im the new guy here as the old was let go for whatever reason. thanks for your input.
  • Posted 30 Nov 2018 05:31 AM
yes normal alarm if no one is on seat. Open seat base and jumper deadman wires. Old seats collapse ans wont activate deadman. Wires can break [url removed] [url removed] wires if changing deadman swithc
  • Posted 30 Nov 2018 11:59 AM
Hello do you know of any number I call to speak with rep about this?
  • Posted 1 Dec 2018 07:04 AM
  • CR500R
  • Indiana, United States
One other thing you might check. Make sure your brake pedal switch isn't activated. On our older 5FBCU15 trucks the brake pedal return spring would break and allow the pedal to activate the switch, which disables the drive, but it doesn't show a code because it just looks like the pedal is pushed. The trucks will drive with the parking brake active, but not the regular brakes. I don't know what the Hytroller controller is that you mention.
  • Posted 5 Dec 2018 11:49 PM
Thanks for your input very much [url removed] i'm calling the Toyota rep today. Ive by passed the brake,seat and seat belt limit switch and it still alarms except when I by pass the brake limit switch the alarm does not sound but it still will not move. The hytroller is a little computer mounted for the operators to login to the forklift and it will turn everything on for them.
  • Posted 6 Dec 2018 01:05 AM
turned out to be a broken wire and [url removed] replaced the horn but it came back today not [url removed] put another horn on it and it works again where could the short be?
  • Posted 7 Dec 2018 04:38 AM
  • CR500R
  • Indiana, United States
Have you checked the horn's contact pins and slip rings under the steering wheel? If you find that to be the problem, check the wear in the plastic piece that holds the contact pins also. If you can rock the pins very far back and forth, the holder will need replaced too. It's not uncommon for the springs to "relax" and loose their tension also.
  • Posted 11 Dec 2018 07:41 AM
yes I cleaned the slip rings and the contacts but I will check the plastic piece that holds the pins as well.

paul perez
utility maintenance specialist
Millenium steel of texas
2108236686
  • Posted 11 Dec 2018 07:55 AM
Total replies: 9. Showing items 1 - 9 of 9 results.

Having trouble using the Discussion Forums? Contact us for help!

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Ads


©Forkliftaction.com
Forkliftaction Media Pty Ltd
PO Box 1439
Milton QLD 4064
Australia
Contact Forkliftaction.com
About Forkliftaction
The Forkliftaction Team
Privacy Policy
Site Map
Help
Business Directory
Discussion Forums
Industry News
Events Calendar
Jobs & Resumes
Photo Galleries
Blog articles
Our Bloggers

Industry Brands
Company Index
Regions & Countries
Machinery-onQ.com

Advertise on Forkliftaction
Editorial Features / Calendar
Featured Businesses
Past News Editions
Industry Associations
Storing your login information automatically.

When you select the 'Remember me' option, your login information will be stored on your computer in the form of a cookie. When you visit Forkliftaction.com again, the stored login information will be retrieved automatically and you will not have to submit your login parameters (email address and password) each time you want to visit our members-only pages.

A cookie is a small piece of data that is sent to your browser from a web server and stored on your computer's hard drive. A cookie can't read data off your hard disk or read cookie files created by other sites. Cookies do not damage your system.

x