Crown RC3020-35:
poor hydraulic steering assist

unit will not steer no power assist when turning steer handle did have orbital replaced no difference
  • Posted 6 Dec 2008 12:12
  • Discussion started by rick_o
  • Pennsylvania, United States
Showing items 1 - 7 of 7 results.
Does the steer motor run, but very slowly? Sometimes the steer motor brush springs loose their tension. I replace the springs every time I do brushes, that usually takes care of it if the armature is OK.
  • Posted 26 Feb 2010 16:38
  • Reply by CSCFR
  • California, United States
Jerry
Any Idea where I can get a repair manual? I don't have a clue what the SVA or torque generator are. Thanks for your time.
  • Posted 26 Dec 2009 21:40
  • Reply by palletman
  • Minnesota, United States
thanks,found valve not functioning,had power through valve no function
  • Posted 9 Jan 2009 11:35
  • Reply by rick_o
  • Pennsylvania, United States
Yes I did. Thanks Marty b, type-o. Thats what I get for replying at midnight.
  • Posted 9 Jan 2009 00:26
  • Reply by roadtek
  • Massachusetts, United States
Roadtek: do you mean SV1? the valve on the torque generator?
  • Posted 8 Jan 2009 23:46
  • Modified 8 Jan 2009 23:47 by poster
  • Reply by marty_b
  • Ohio, United States
Make sure SVA in the torque generator manifold is functioning. Without it you will have no steering. Do you have tilt and sideshift if so equiped?
  • Posted 28 Dec 2008 11:26
  • Reply by roadtek
  • Massachusetts, United States
check to see if the steering race (big round bearing) is binding

do you have 1200 psi when you try to steer/ (check the pressure if steer race is ok.

Is the chain good?
  • Posted 12 Dec 2008 23:03
  • Reply by marty_b
  • Ohio, United States

Having trouble using the Discussion Forums? Contact us for help.

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Machinery-onQ Listings
Combilift C3000
  • CombiliftC3000
  • 2014 | Used - Sale
  • Australia
  • AUD 44,000
Denyo DCA13ESY
  • DenyoDCA13ESY
  • 2003 | Used - Sale
  • Japan
Komatsu SK714
  • KomatsuSK714
  • 2002 | Used - Sale
  • Japan
Dynapac CP202W
  • DynapacCP202W
  • 2000 | Used - Sale
  • Japan
Aichi SR123
  • AichiSR123
  • 1997 | Used - Sale
  • Japan
Komatsu PC200SC6
  • KomatsuPC200SC6
  • 1998 | Used - Sale
  • Japan
Komatsu JV25CW2
  • KomatsuJV25CW2
  • 1996 | Used - Sale
  • Japan
Airman PDS655SD
  • AirmanPDS655SD
  • 2004 | Used - Sale
  • Japan
Combilift C4000
  • CombiliftC4000
  • 2012 | Used - Sale
  • Australia
  • AUD 31,990
Combilift C2500
  • CombiliftC2500
  • 2012 | Used - Sale
  • Australia
  • AUD 42,500
Featured Business
F. Uchiyama
Global exporter of used forklift and construction machinery, servicing over 50 countries.
Machinery-onQ Listings
Dynapac CP202W
  • DynapacCP202W
  • 2000 | Used - Sale
  • Japan
Aichi SR123
  • AichiSR123
  • 1997 | Used - Sale
  • Japan
Airman PDS655SD
  • AirmanPDS655SD
  • 2004 | Used - Sale
  • Japan
Combilift C3000
  • CombiliftC3000
  • 2014 | Used - Sale
  • Australia
  • AUD 44,000
Komatsu PC200SC6
  • KomatsuPC200SC6
  • 1998 | Used - Sale
  • Japan
Combilift C2500
  • CombiliftC2500
  • 2012 | Used - Sale
  • Australia
  • AUD 42,500
Combilift C4000
  • CombiliftC4000
  • 2012 | Used - Sale
  • Australia
  • AUD 31,990
Denyo DCA13ESY
  • DenyoDCA13ESY
  • 2003 | Used - Sale
  • Japan
Komatsu JV25CW2
  • KomatsuJV25CW2
  • 1996 | Used - Sale
  • Japan
Komatsu SK714
  • KomatsuSK714
  • 2002 | Used - Sale
  • Japan