News service and business centre for materials handlingHOME
DISCUSSION FORUMS : Forkliftaction.communicate
Yale forklift check engine light
Greetings all, I had a tech on a machine earlier today, a light had come on the dash with a wrench on it. Checking connections and disconnecting the battery turned the light off. In the event it comes back on, is there a "pedal dance" or any way to access a code for one of us "INDEPENDENT'S"?? :)

steve at forkliftt dot com
  • Posted 30 Aug 2014 04:35 AM
Total replies: 8. Showing items 1 - 8 of 8 results.
  • kevin_t
  • Pennsylvania, United States
Model AND SERIAL number of the truck?
  • Posted 30 Aug 2014 04:40 AM
Sorry- had copied. Forgot to paste.

steve at forkliftt dot com
  • Posted 30 Aug 2014 06:13 AM
  • swoop223
  • North Carolina, United States
notice any codes on the display accompanying this wrench light?

You've been swooped!
  • Posted 30 Aug 2014 06:34 AM
Don't think so. He didn't mention any. I can be sure Tuesday.

steve at forkliftt dot com
  • Posted 30 Aug 2014 06:40 AM
  • kevin_t
  • Pennsylvania, United States
Codes are "flashed" with the wrench light when you connect a code scan tool,but I believe you can jump two pins in the DTC data connector and flash them that way with out a scan [url removed] one know if this is correct,know HYSTER has the same set up on some of their trucks the scan tool(s) are made by Rhinda technologies corp for HYSTER and [url removed] also use this system on marine engines like the 4.3 L v 6 and 4 Cyl. Engines.....
  • Posted 30 Aug 2014 06:47 AM
Great info Kevin, thanks for the post. Maybe someone has info on how to jump out the two pins.
On a side note, my Ford '05 6.0 died on me last week. After tons of reading online I purchased a Scan Gauge 2, and plugged into the OBDII port. To monitor FICM voltage and some other values need to troubleshoot with, you could enter parameters under XGauge and set up to have them displayed. I'm wondering if this might be possible on some Nissan models that have the OBDII port??

steve at forkliftt dot com
  • Posted 30 Aug 2014 07:04 AM
  • swoop223
  • North Carolina, United States
yes i see that now, need a scan tool to pull codes from this one
also the jumper method is possible, find the diagnostic connector and jump pins A and D , turn on key to on position and it should go into diagnostic mode and cause the MIL light to flash the codes.
This system on this truck also uses the spectrum PSI EDIS software so if you happen to have that cable setup that can hook up to this diagnostic connector it may interface with this truck. You just need to make sure it is the right Tier version of software. Either Tier 2 or 3 most likely.

You've been swooped!
  • Posted 30 Aug 2014 11:55 PM

steve at forkliftt dot com
  • Posted 5 Sep 2014 03:16 PM
Total replies: 8. Showing items 1 - 8 of 8 results.

Having trouble using the Discussion Forums? Contact us for help! accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.


Forkliftaction Media Pty Ltd
PO Box 1439
Milton QLD 4064
About Forkliftaction
The Forkliftaction Team
Privacy Policy
Site Map
Business Directory
Discussion Forums
Industry News
Events Calendar
Jobs & Resumes
Photo Galleries
Blog articles
Our Bloggers

Industry Brands
Company Index
Regions & Countries

Advertise on Forkliftaction
Editorial Features / Calendar
Featured Businesses
Past News Editions
Industry Associations
Storing your login information automatically.

When you select the 'Remember me' option, your login information will be stored on your computer in the form of a cookie. When you visit again, the stored login information will be retrieved automatically and you will not have to submit your login parameters (email address and password) each time you want to visit our members-only pages.

A cookie is a small piece of data that is sent to your browser from a web server and stored on your computer's hard drive. A cookie can't read data off your hard disk or read cookie files created by other sites. Cookies do not damage your system.