 ROBUR SBC-R compact counterbalance reach truck |
|
Stanley adds to ROBUR range
Leeds, UK
Stanley Handling has launched a new ROBUR reach truck designed to fit into tight spaces.
The ROBUR SBC-R compact counterbalance reach truck, manufactured in Italy, is aimed at small to medium-size warehouses where space is at a premium and watching the bottom line is a high priority.
Sarah Stanley, marketing director for Stanley Handling, says the new model can work in an aisle width of just over two metres.
The SBC-R’s load capacity is 1,500 kilograms (1.65 tons) and its lift heights are 4,000mm (13 feet).
New mirrors give all-round view
Cheshire, UK
Bohle Mirror Systems has increased its safety products range by adapting convex mirror technology so it can be applied to forklifts.
The Forklift Half Dome has a wide-angle 180-degree viewing area and is distortion free. The mirror allows the driver to see behind and either side of the forklift.
Attached with a bracket, the mirror is fitted through the cab roof or fixed to the cab upright supports. The back is moulded plastic with an adjustable ball joint, which makes it strong and flexible.
Easily adjusted to different angles, the mirror has an impact-resistant acrylic face and is easy to install and maintain.
New Flexi added to range
West Midlands, UK
Narrow Aisle had added the Euro to its Flexi articulated trucks range.
The new model is a compact four-wheel forklift designed for low bay warehouses where there is little space.
The chassis is1,060mm wide (3.4 feet) and the new model can lift maximum of 1,500kg (1.5 tons) to a height of seven metres.
The narrow front axle can stack narrow continental pallets and work in aisles as narrow as 1,642mm-wide (5.39 feet), or 1,762mm-wide (5.78 feet) with an ISO pallet.
The Euro can be used inside or outside the warehouse facility.
Versatile rider/stacker ideal for small areas
Hampshire, UK
Yale Europe recently announced the release of a new pedestrian controlled rider/stacker that can be used by employees without a forklift licence.
The MC10-15, manufactured in Masate, Italy, is useful in situations where counterbalance forklifts are too large.
This new addition replaces the old MC. The MC10-15 uses a new mast and AC technology - the old one used DC power.  Yale's MC10-15 pedestrian controlled counterbalance truck |
|
CURRENT NEWS
|
