Forkliftaction.com

DISCUSSION FORUMS : Forkliftaction.communicate

My forum profile

Printable version

Discussion Forums Home

Forum:

Technical arena

Discussion:

Need any help with Jungheinrich ELE pallet movers with MP1510 !!!

Number of messages: 7

START MESSAGE:

krasimir_z
Shumen, Bulgaria

Can anybody help?  I need wiring diagrams and error codes for ELE series pallet movers.
The boards are:
MP 1510 -Interface 2    50053044-6/99
MP 1510C  50104554-06/00
This machine come from one company where someone had try to repair and  had make shortcut on relays. The driver for one relay was out. There are some changes on wiring  and have some wires and connections  not connected. Now if I connect  power 24 V on board 1 the voltage 5V- OK, the voltage 12V is round 10v, the voltage 15V is round 12V. I don't find where is the regulator  of 12V ? The ZA led blink  every 1 sec and error led on board Interface 2 blink round 0.5 sec.

Thanks preliminary. Pls send to  elmech # abv dot bg The e-mail is also show in my profile.

Posted 7 Nov 2009 01:59 AM

Report this message

REPLIES:

Sort replies by

krasimir_z
Shumen, Bulgaria

I'm still waiting you help!

Posted 11 Nov 2009 00:10 AM

Report this message

danny_k
Buckinghamshire, United Kingdom

Have you got a serial number?

Posted 11 Nov 2009 03:44 AM

Report this message

ramex
nuevo leon, Mexico

have some information about this controller beeing used on a different brand truck tough. do you think may help ?

Posted 11 Nov 2009 08:20 AM

Report this message

krasimir_z
Shumen, Bulgaria

Ramex , I think if this controller is used, the wiring diagram of external devices and switches and the error code table are the same. Thank for any help!

Modified 12 Nov 2009 06:16 AM
by poster.

Report this message

ramex
nuevo leon, Mexico

hi. kasimir. Check your mail, i already sent it. hope it helps.

Posted 12 Nov 2009 11:03 AM

Report this message

krasimir_z
Shumen, Bulgaria

Thanks, ramex! Sorry for delay, but I was busy. Your manual is about different machine and externally wiring and Interface 2 board are also different. I think the Power board is the same. Notwithstanding it help me a little. I notice that the ZA led flash 38 error ( I don't notice that before), but I don't know what it mean, because in your manual there are only 21 errors. If you has ' Electrical Schematic SENB 6620-01s.pdf ' you can send me it. Maybe it would be in help to find where is the stabilizers for 12V and 15V.

Posted 18 Nov 2009 06:51 AM

Report this message

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

FORUM GLOSSARY

Click for description.

FORUM

DISCUSSION

MESSAGES

NICKNAME

SIGNATURE

FORUMS

Discuss: Industry News & Whispers

Discuss: Conferences, trade shows & other events

Discuss: Mechanical Troubleshooting

Discuss: Technical arena. Did you know? Who knows?

Discuss: Machines. Forklifts, stackers, telehandlers, container handlers and reach stackers

Discuss: Business issues

Discuss: Safety, training & legislation

Discuss: Fun at work