Email
Password   Forgotten?
Remember me
Marketplace
Business Directory
Discussion Forums
Home
My profile
Search
Spec-Checker
Industry News
Events Calendar
Jobs & Resumes
Photo Galleries




Home | About us | Advertise with us | Tell an associate | Contact us | Site map | Help 
Search  
DISCUSSION FORUMS : Forkliftaction.communicate
Forum: Safety, training & legislation
Discussion:  Russian Vodka Forklift Accident
Number of messages: 13

START MESSAGE:
joseph_h
Michigan, United States
CBS recently aired security camera footage of a forklift accident inside a Russian vodka warehouse. The video shows the destructive power of a forklift and what can happen when storage racks are not properly designed and installed.

It is a great video destined to become a classic. I recommend it be used in all forklift training. It has already appeared on a multitude of web sites.

Google: Russian vodka forklift video


Posted 4 Nov 2009 03:56 AM Reply  Report this message
REPLIES: Sort replies by
dan_m
Ontario, Canada
It appears that he suddenly accelerated just a sec before crashing into the racking.

What a mess!

Posted 4 Nov 2009 05:28 AM Reply  Report this message
mrfixit
New York, United States
Why on Earth are they using big duel wheel, diesel powered forklifts in a warehouse with isles and racking?

Posted 4 Nov 2009 10:10 PM Reply  Report this message
dan_m
Ontario, Canada
To clean-up that mess?

Sorry!

Posted 4 Nov 2009 10:55 PM Reply  Report this message
Normandy
Co. Cork, Ireland

I suppose all trainers have experienced a time when a learner has pressed the accelerator instead of the brake but thankfully not with the same consequence.

It must be one of the best though !!!!!

Posted 6 Nov 2009 01:46 AM Reply  Report this message
johnr_j
Georgia, United States
mrfixit,
Solid tire (or cushion tire) counterbalanced forklifts are primarily used in the US, Canada, some in Germany and Austrailia.  The rest of the world used pneumatic tire units.

However, operator error exists worldwide.

-------------------------
Have An Exceptional Day!

Posted 6 Nov 2009 03:14 AM Reply  Report this message
cownd
Arizona, United States
Good example of ROPS in action

Posted 6 Nov 2009 08:19 AM Reply  Report this message
Prentice
Ontario, Canada

That is unbelievable, Hope everyone was OK. I guess it was shaken .....not stired.....

Posted 6 Nov 2009 11:02 PM Reply  Report this message
firstsafety
British Columbia, Canada
There is small company in Penticton that is just about ready to introduce thier product that would have eliminated that accident. [url/email removed]. It' worth checking out.

Posted 7 Nov 2009 09:05 AM Reply  Report this message
dan_m
Ontario, Canada
Don't see it!

Posted 9 Nov 2009 12:35 AM Reply  Report this message
TC17
Wisconsin, United States

I agree with Mrfixit.......why in the heck are they using that type of equipment inside and in a warehouse with racks. Also notice the racking, I would think they would have larger/thicker/stronger racking to hold up that type of weight, but of course with that lift truck ramming into the bottom racking at that speed, I am not sure if any other racking would have survived, just luck no one was fatally injured.

-------------------------
Wisconsin, USA "Be safe"

Posted 11 Nov 2009 00:06 AM Reply  Report this message
cownd
Arizona, United States
TC17, all; you must remember this occured in Russa where rules and regulations you are acustomed to do not apply.

Posted 11 Nov 2009 00:10 AM Reply  Report this message
andrew_j
Florida, United States
It's the perfect storm. Big forklift not normally used in a warehouse, he accelerates by mistake in reverse, doesn't brake so we have impact and a ramming impact, hits the weakest point in the warehouse the frame holding up the tunnel aisle. Because he is ramming the rack he takes out at least two frames causing the rack above to buckle at mid point. This causes the top part to bend out onto the rack opposite. The opposite rack beams become overloaded and are being dragged out and forward so they in turn buckle their frames. This causes both sides of the aisle to collapse into the aisle. This whole thing is ultra unusual. Rack normally peels from an end bay with the bottom of the frame giving way.The frame then leans in to the aisle and peels away from the back to back rack bringing with it several bays. But that is usually it, none of this dramatics.
It's almost as this was a movie. "Shaken not stirred"  " Drink responsibly"

Posted 21 Nov 2009 04:48 AM Reply  Report this message


Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.
FORUM GLOSSARY
Click for description.

FORUM
DISCUSSION
MESSAGES
NICKNAME
SIGNATURE

FORUMS
©Forkliftaction.com
Privacy policy
Related links
Site map
About us
Marketplace | Business Directory | Discussion Forums | Spec-Checker | Industry News | Events Calendar | Jobs & Resumes | Photo Galleries
Forkliftaction.com – PO Box 1439, Milton QLD 4064, Australia