Showing items 1 - 6 of 6 results.
was able to get it fixed the limit switch was installed upside down
was able to get it fixed the limit switch was installed upside down
the outher mechanic here jumped the switches at the base of the handle and its still not working
Code E112:
Arm angle input stuck on or off.
Problem with arm angle input wiring.
Problem with tiller arm.
Check for correct sequence of arm angle switches.
Communication error due to power amplifier
PMT; allow PMT to reboot before turning truck ON.
well it just blinks yellow with about seven seconds in between blinks but know when i tilt the handle forward it give me a E112 code
What is the flash sequence of the flashing led.....should be something like 1 short blink...pause the two blinks or along those lines.....read the flash sequence and post.....alos post an email ain your profile
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.