Email
Password   Forgotten?
Remember me
Marketplace
Business Directory
Discussion Forums
Home
My profile
Search
Spec-Checker
Industry News
Events Calendar
Jobs & Resumes
Photo Galleries
Home | About us | Advertise with us | Tell an associate | Contact us | Site map | Help 
Search  
DISCUSSION FORUMS : Forkliftaction.communicate
Forum: Technical arena
Discussion:  WIRE GUIDANCE
Number of messages: 15
START MESSAGE:
DAMO
DUBLIN, Ireland

 		I recently came across a major defect in zapi wire guidance systems ..... as with the older keltronic systems when the loop is broken no guidance ,,,,,,,,, But with zapi half the warehouse will work ...... not the best situation i would think ....... My question is ,is there a way of adjusting the smart antennas so they are less sensative ...                                     cheers damo

Posted 17 Aug 2008 10:01 PM Reply  Report this message
REPLIES: Sort replies by
kevin_k
dumfriesshire, United Kingdom

 		damo ,you must have 2 loops in your floor . zapi will guide if there is a signal

Posted 19 Aug 2008 03:41 AM Reply  Report this message
DAMO
DUBLIN, Ireland

 		ONLY ONE LOOP KEVIN ......ONE LINE DRIVER ON THE WALL I EVEN DISCONECTED ONE OF THE WIRES FROM THE DRIVER ....... THE MACHINE WILL DRIVE UP TO 150 METERS ????????does not add up

Posted 22 Aug 2008 01:51 AM Reply  Report this message
edward_t
North Carolina, United States

 		I know on some NACCO VNAs, with zapi wire guide, you can adjust all sort of peramiters as long as you have the handset, it won't power up for the computer software to make the adjustments..

Posted 22 Aug 2008 08:15 PM Reply  Report this message
kevin_k
dumfriesshire, United Kingdom

 		total mystery to me damo . the vna trucks i have will search for the wire for a second or less then stop . do they run straight on the wire ?

Posted 24 Aug 2008 03:05 AM Reply  Report this message
edward_t
North Carolina, United States

 		do they run straight on the wire ?  in both forward and revenge?
errrrr, I mean reverse...
Posted 24 Aug 2008 03:13 AM Reply  Report this message
DAMO
DUBLIN, Ireland

 		Yes perfect forward and back......???Disconected another line driver [keltronic]on another site same thing .....

Posted 26 Aug 2008 09:20 AM Reply  Report this message
mauri
re, Italy

 		probably the line driver had caps inside taking long delay for discharging. Try to disconnect the wire instead!!

Posted 2 Sep 2008 09:04 PM Reply  Report this message
DAMO
DUBLIN, Ireland

 		yes i done that originally and of course no pick up ......I must say its a very good system mauri ....... I dont no if the rl07 board is common on most trucks but it makes setting the system up very handy  ..... compared to fitting keltronic ... also no feed back pot on the drive motor  .... The only other thing i came across mauri we got a couple of eps units in and each time  i had to clear the eeprom?
Cheers for the reply damo .......

Posted 3 Sep 2008 01:54 AM Reply  Report this message
mauri
re, Italy

 		damo, it is not clear what you meean because I don't know the context. Anyway a clear eeprom generally is not required because it is factory done before releasing the controller.  

Posted 12 Sep 2008 08:13 PM Reply  Report this message
silvio
buenos aires, Argentina 		do you have a manual or datasheet? give me an e-mail and i`ll send it.

-------------------------
EMAIL silvio_jorge@hotmaildotcom

Posted 1 Oct 2008 01:15 AM Reply  Report this message
DAMO
DUBLIN, Ireland

 		Hi silvio if u have a manual in english that would great ....
i have one already ,,,,, but maybe they are different in some ways ...
maybe we can exchange ....manufacturer is often different to
the supplier ... wiff  at eircom.net      
Posted 1 Oct 2008 03:52 AM Reply  Report this message
silvio
buenos aires, Argentina 		I can`t understand your e-mail. [url/email removed]

Posted 1 Oct 2008 06:15 AM Reply  Report this message
DAMO
DUBLIN, Ireland

 		HI silvio thanks for the reply .....e mail adresses are removed automatically
at =@ .... so its wiffateircom.net            thanks again silvio

Posted 1 Oct 2008 06:42 AM Reply  Report this message
DAMO
DUBLIN, Ireland

 		CHEERS LAD
PERFECT

Posted 1 Oct 2008 07:16 AM Reply  Report this message


Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.
FORUM GLOSSARY
Click for description.

FORUM
DISCUSSION
MESSAGES
NICKNAME
SIGNATURE

FORUMS
Discuss: Industry News & Whispers

Discuss: Conferences, trade shows & other events

Discuss: Mechanical Troubleshooting

Discuss: Technical arena. Did you know? Who knows?

Discuss: Machines. Forklifts, stackers, telehandlers, container handlers and reach stackers

Discuss: Business issues

Discuss: Safety, training & legislation

Discuss: Fun at work
©Forkliftaction.com
Privacy policy
Related links
Site map
About us
Marketplace | Business Directory | Discussion Forums | Spec-Checker | Industry News | Events Calendar | Jobs & Resumes | Photo Galleries
Forkliftaction.com – PO Box 1439, Milton QLD 4064, Australia