Forkliftaction.com

DISCUSSION FORUMS : Forkliftaction.communicate

My forum profile

Printable version

Discussion Forums Home

Forum:

Technical arena

Discussion:

Electronic schemes for STILL R70

Number of messages: 12

START MESSAGE:

oleg_t
Odessa, Ukraine

Dear sirs, At me have arisen problems with the dash panel (console) of STILL R70-16. Electronic schemes of the push-button console and the electronic controller are necessary for me.
At me is " Workshop Manual 7052/56/74-76, 7054/58/77-79 for R70-16-18-20 Compact " and " Workshop Manual R 7011 (R 7031, R 7001) for R70-15-16 " but unfortunately in these manuals there are no schemes of electronic blocks. In advance I thank for the rendered assistance.

Posted 21 Sep 2007 00:38 AM

Report this message

REPLIES:

Sort replies by

oleg_t
Odessa, Ukraine

Up!!!

Posted 27 Sep 2007 05:49 AM

Report this message

gary_d
scotland, United Kingdom

whats the fault

Modified 27 Sep 2007 08:45 AM
by poster.

Report this message

oleg_t
Odessa, Ukraine

Problem following: there is no indication on the display, buttons do not work, the command on a driving direction does not move. On the engaged display the background is looked through only.

Posted 5 Oct 2007 05:15 PM

Report this message

simon_k
Devonshire, United Kingdom

Does the display light up?.. not sure a wiring diagram will help as the only connection is a CAN-bus lead to the controller(4 pin screw in coupling). There should be 10v DC across 2 of these pins and the other 2 are CAN high and low for data transfer.
    If you can give me the first 6 digits of the serial number (ie 517054??) I can help more.
              Regards,
                         Simon

Posted 7 Oct 2007 04:52 PM

Report this message

oleg_t
Odessa, Ukraine

Hello Simon!
I have tried all variants, a voltage on the four-contact jack in norm. Number of a forklif: 70741178 Still Saxby
Thanks for friendly support!

Posted 19 Oct 2007 01:54 AM

Report this message

simon_k
Devonshire, United Kingdom

It does sound like the console is defective unfortunately. Do you have a spare CAN lead you could use to connect console to controller?.. always worth a try..
I will dig out some info for you anyway if you can give me an email address..
Regards,
Simon

Posted 19 Oct 2007 02:36 AM

Report this message

oleg_t
Odessa, Ukraine

My e-mail: [url/email removed]

Posted 19 Oct 2007 03:06 AM

Report this message

oleg_t
Odessa, Ukraine

oleg-od-ua(dog)rambler.ru

Posted 19 Oct 2007 03:08 AM

Report this message

simon_k
Devonshire, United Kingdom

hmmm..forgot about the blocks...

Modified 20 Oct 2007 02:27 AM
by poster.

Report this message

oleg_t
Odessa, Ukraine

Hello, Simon!
My E-mail is next:
login: oleg-od-ua
E-mail server: rambler.ru
ICQ: 111313957

Modified 19 Oct 2007 02:26 PM
by poster.

Report this message

simon_k
Devonshire, United Kingdom

Okay Oleg, I'll send some drawings to you tomorrow hopefully.

Posted 20 Oct 2007 02:26 AM

Report this message

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

FORUM GLOSSARY

Click for description.

FORUM

DISCUSSION

MESSAGES

NICKNAME

SIGNATURE

FORUMS

Discuss: Industry News & Whispers

Discuss: Conferences, trade shows & other events

Discuss: Mechanical Troubleshooting

Discuss: Technical arena. Did you know? Who knows?

Discuss: Machines. Forklifts, stackers, telehandlers, container handlers and reach stackers

Discuss: Business issues

Discuss: Safety, training & legislation

Discuss: Fun at work